suspension point meaning in English
悬挂点
Examples
- Although the join - structure increases the redundancy ability and enhances the security when maglev train runs at high speed , the two suspension points on the same join - structure coupled closely
搭接结构增加了列车悬浮系统的冗余能力,提高了列车在高速行驶时的安全性。 - When the join - structure is suspended , suspension state message between the two suspension points should be exchanged and the digital suspension controller will communicate with the sensor . this function is realized by rs - 485 serial communication
在对搭接结构进行悬浮控制时,两个悬浮点之间需要实时交换状态信息,并且传感器与数字悬浮控制器之间也要传输数据,两类信息交换是通过rs - 485串行通信来实现的。 - The experiment result shows that the control method designed in the dissertation can ensure the steady suspension of the join - structure . when there is something wrong with one suspension point on a join - structure , the variation of suspension clearance of the other is only about 0 . 8mm . it manifests that this method can achieve the join - structure ’ s redundancy function
本文最后在原理型搭接装置上进行了悬浮控制实验,实验结果表明:文中所设计的控制方法能够实现原理型搭接装置的稳定悬浮,而且搭接装置上的一个点出现故障时,另一个点的悬浮间隙最大增加量仅为0 . 8mm左右,由此说明该方法能够确保搭接结构冗余功能的实现。 - It is difficult to ensure the steady suspension of the join - structure if the control method of the two suspension points is designed independently , so the coupling force between the two points must be taken into account . in this dissertation , the model of the join - structure is built . the model is decoupled and linearized by differential geometry method
但是,同一搭接结构上的两个悬浮点之间具有很强的耦合作用,在对搭接结构进行悬浮控制时,如果对两个悬浮点独立进行悬浮控制设计,很难使搭接结构稳定悬浮,因此必须考虑它们之间的耦合作用。